Where is connect button on xbox 360

Wireless controller troubleshooting. Solution 1: Replace the batteries. Insert a new set of AA alkaline batteries into the Xbox Wireless Controller, and then try to turn it on.

Solution 2: Try a different battery pack. If you have another Xbox Wireless Controller, take the battery pack from that controller and attach it to your controller. Then, try turning on your controller.

If it works with the different battery pack, your original battery pack might be defective. If your controller is under warranty, you can order a replacement battery pack from Device service and repair. Solution 3: Try a rechargeable battery pack. If you or a friend has an Xbox Rechargeable Battery Pack, attach that battery pack to your controller.

If your controller works with the rechargeable battery pack attached, you can buy a new battery pack from a retail store or order a replacement from Device service and repair. If your wireless controller disconnects or can't connect to your console, see Xbox Wireless Controller disconnects or can't connect.

Did this resolve the issue? Yes No. On the original model, this lies just under the disc tray. On all other models, such as the Xbox S or E editions, it's on the lower right side of the console's face. Press the console's connect button. Depending on the type of you have, the circular light around the console's power button will either flash or spin around the button's perimeter. Press the connect button on the controller , located on top of the controller just above the battery compartment, within 20 seconds of pressing the corresponding button on the console.

The controller's Ring of Light will glow and spin. Once the light stops spinning and glows a solid green on both console and controller, the controller has successfully synced. Repeat the process for each successive controller you wish to connect. If you are using a wireless controller, you can try re-syncing your Xbox One controller to the console to fix connection issues.

After a few seconds you can see it switch back to a solid light, which means it is re-synced. The simplest solution is to restart your controller. In many cases, the problem is triggered by faulty connection between the 2 devices.